NAPCO Kitchen Renew Countertop Coating
Our Kitchen Renew Countertop Coating will help your customers get the flawless finish they have been looking for, for a fraction of the cost! This kitchen countertop refinishing coating is specifically formulated for use by an HVLP system to ensure a smooth, high-quality application. This is a 1K product – ALL IN ONE WATERBORNE system can also be used in conjunction with our extremely popular Flint-stone, faux-granite countertop refinishing coating! Just spray over the wet or dry flint-stone coating for a durable, satin gloss topcoat that will beautify any kitchen countertop.
When Applying:
⋅ No priming necessary.
⋅ Applied with a #3 needle, just like 320 Clears.
⋅ Just load up the gun and apply. If using a PPS, remove the screen from the lid so as not to trap air in the coating.
⋅ 1K product – ALL IN ONE WATERBORNE No mixing, no catalyst, and no primer needed.
⋅ Can be sprayed wet over wet, no need to wait for the Flint-Stone coating to dry - saves 24 hours of labor/waiting time!
⋅ If spraying wet-on-wet do not use primer before applying the Flint-Stone. You can apply the Kitchen Renew Satin Clear for Countertops any time after the last coat of Flint-Stone is applied if no primer was used.
⋅ Levels to a smooth finish, no need to sand - another time & labor saver!
⋅ Dry to tack in 20 minutes.
⋅ If you’ve applied Epoxy Primer before the Flint-Stone, you should apply three to four heavy crosshatch coats of Flint-Stone and wait until fully dry before applying the Kitchen Renew Satin Clear for Countertops - preferably the next day.
⋅ Don’t force-dry the Flint-Stone if applying the Satin Clear, it may give a false impression the Flint-Stone is fully dry, even though it takes a good 48-72 hours to fully cure.
⋅ No need to wait long in between coats of Satin Clear for Countertops – 1-2 minutes.
⋅ Spraying wet-on-wet gives the Satin finish; if waiting until fully dry, it will appear slightly glossier (like a Semi-Gloss).
⋅ After applying the final coat of Satin Clear (3-4 crosshatch pattern coats), shut off box fans/other ventilation to allow it to dry so as to prevent any issues from occurring.
⋅ End users can put things back roughly two to three hours after the Satin Clear is fully dry. Light use after 24 hours; full use after 48 hours - film will continue to harden over the next 5-7 days.
⋅ Easy clean up with soap and water!
⋅ Any unused clean material can be placed back in the container, so no waste!
How To Refinish Countertops with NAPCO Essentials Kitchen Renew Countertop Coating - Watch the Video
NAPCO Essentials Kitchen Renew Coatings
NAPCO is proud to offer top-of-the-line supplies for the kitchen resurfacing industry. Our Kitchen Renew line is specifically formulated for both countertops resurfacing and cabinet resurfacing. Please see all Kitchen Renew product links below:
Kitchen Renew Satin Clear Countertop Coating - help your customers get the flawless finish they have been looking for, for a fraction of the cost!
Kitchen Renew Satin White Cabinet Coating - smooth and beautify old cabinet doors and surfaces for a fresh new look!
Kitchen Renew Satin Custom Color Cabinet Coating - this waterborne coating is specifically formulated for use by an HVLP system to ensure a smooth, high-quality application.
Click here or call us today at 800-888-1081 for more information.